CBR250 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
Thanks for the help on my previous thread guys. After fiddling around with the cibby i have found that the idle adjuster has become fully unscrewed. Can anyone help with screwing the idle adjuster back on? Where would it go?
 

·
Registered
Joined
·
2,866 Posts
you have to take the tank off......
the easy way is to just use a pair of long nosed pliers............otherwise you can take the carbies off.
the screw goes from underneath to a spot in between the 3rd and 4th carbie when sitting on bike......
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #3 ·
Two50RR said:
you have to take the tank off......
the easy way is to just use a pair of long nosed pliers............otherwise you can take the carbies off.
the screw goes from underneath to a spot in between the 3rd and 4th carbie when sitting on bike......
Thanks a lot that was really helpful :) i managed to get the cable screwed in without removing the carbies and the cibby started and idled fine!
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top