CBR250 Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
37 Posts
Haha, Ive been here for more than 4 years (old username HauntedDawg).

But yeah, there is no other topics available that discuss this except this one.

So please guys, any input would be appreciated it. My bike has been standing for over 2 years now as I for one cant figure out if mc19 or mc22 cdi will fit. Have spoken to multiple people, 33% say it will fit, 33% say maybe, other 33% say no, other 1% didnt even bother.
 

· Registered
Joined
·
37 Posts
OK Guys! Some good news!

mc17 CDI will fit the mc14, the mc19 can fit by adjusting the cdi & diodes.

Starben, I am waiting for an email, but here in SA, there might be 6 mc14 CDI's available.

I will let you know tomorrow on price.
 

· Registered
Joined
·
37 Posts
Whatdya mean by adjusting the cdi and diodes?

What would the effect be?would it run?
:cool:
Not sure, was told by an electrician.

Anyway, same electrician has phoned me this morning to say that the mc17 and mc19 will fit the mc14 as they are the same. The mc22 is different and requires the diodes to be changed. Not sure how, or not sure what he means.

A brand new amkt cbr250 mc17 cdi here in SA is R2380 which equals to 250 AUD. Quite pricey considering the ones on ebay are for mc19 and 22. However, those on ebay state mc19 and 22, but I have confirmed source that the 22 is different to the mc19 and therefor can not be used from an mc22 to the mc19 and below.

I hope this clears up anything.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top