CBR250 Forums banner

1 - 20 of 24 Posts

·
Registered
Joined
·
87 Posts
Discussion Starter #1
selling my 91' honda cbr250rr
-1999 australian compliance.
-Bought it in April, owned it for only 2 months.
-Only rode 600kms on it.
-Mechanically A1
-Beet JMCA Nassert Basic Muffler
-currently 54XXXkms
-Fixed the brake performance, service brake when i got the rwc done.
it has extractors in the bike so the bike rides a bit more smooth. it has a different feel to it comparing to other bikes
-Colour is purple/gold and little bits are black
-Bike runs perfectly fine, nothing is wrong with the performance
-There are scratches on the left hand side of the bike since most Learner bikes have fairing damage. also damage on the left hand side bottom fairing where it says the "fireblade"
Damage was already there when i bought the bike.
-Hasnt been dropped since.

-brake fluid was changed, 600kms ago. fixed the brake lights/ service brakes when i bought the bike.

-reconditioned carby

-comes with rear Pirelli sports demon tyres, pretty new too. a lot of treads left

Bike is really clean, always garaged.

-selling with rego . rego expires aug 2010

Price is $4500. Price Dropped to $4,000

Reason for selling is because i need the money for a car.

Inspections welcome, but no test rides.










 

·
Registered
Joined
·
3,991 Posts
RE: [MELB] 1991' Honda CBR250rr for sale

did you buy this off ebay? looks familiar
 

·
Registered
Joined
·
2,866 Posts
RE: [MELB] 1991' Honda CBR250rr for sale

havent seen that scheme b4.
the pipe looks like its from a bigger bike.....

GL with sale....
 

·
Registered
Joined
·
614 Posts
RE: [MELB] 1991' Honda CBR250rr for sale

wat type of pipe is that???
 

·
Registered
Joined
·
2,541 Posts
RE: [MELB] 1991' Honda CBR250rr for sale

i can definately tell you, that isn't a stock system, care to dig around for info on it mate?
 

·
Registered
Joined
·
87 Posts
Discussion Starter #9
RE: [MELB] 1991' Honda CBR250rr for sale

im not sure, i bought it with the pipe. but ill look into it.
 

·
Registered
Joined
·
614 Posts
RE: [MELB] 1991' Honda CBR250rr for sale

yeah that aint a stock system! it looks totally different to the mc22 stock system das for sure!

what pipe system is it ?
 

·
Registered
Joined
·
87 Posts
Discussion Starter #11
RE: [MELB] 1991' Honda CBR250rr for sale | PRICE DROP

oh yeah to reply to the questions of the muffler. i did some research and the muffler was made by Beet Japan Co. LTD.. it is a JMCA muffler a Nassert Basic Muffler[hr]
This Muffler is made by Beet Japan CO LTD. it is called a JMCA, Nassert Basic Muffler
 

·
Registered
Joined
·
2,541 Posts
RE: [MELB] 1991' Honda CBR250rr for sale | PRICE DROP

beet! noice!...if i were you, i'd try to source a stock system, and sell the beet system separately. irection you'd make decent coin from it.
 

·
Registered
Joined
·
87 Posts
Discussion Starter #13
RE: [MELB] 1991' Honda CBR250rr for sale | PRICE DROP

the thing was i thought 4.5k for my bike was a decent price, but i have yet to receive an offer, so i dropped the price to 4.2k, and might as well sell this bike as whole.
 

·
Registered
Joined
·
614 Posts
RE: [MELB] 1991' Honda CBR250rr for sale | PRICE DROP

yeah its kind of hard selling cbr's these days especially how the ninja250s are starting to be the trend!
fuck it! mc22 ftw !
=]
 

·
Registered
Joined
·
1,816 Posts
r-r-R-R-RREVIVE

So I actually found the same BEET muffler on a mate's bike today.

Has any one got any info on these?
 

·
Registered
Joined
·
5,392 Posts
Merudo has one on his project bike. Pulsecorn. Which is the name of his exhaust too.

Beet is just a Japanese parts company that made aftermarket parts for the ciblet. Beet exhausts and rearsets are somewhat common on these bikes.
 

·
Registered
Joined
·
672 Posts
Just came across this JMCA exhaust system. Will post better pics soon. Was wondering if I could get some assistance identifying the manufacturer.

Here is the jmca compliance plate on it.



What has me confused is what is a JMCA exhaust system doing on a aus del CBR250RR(RII)

Look forward to some info on this. Unfortunately I can't read Japanese.
 

·
Registered
Joined
·
11,384 Posts
Young man, there's no need to feel down.
I said, young man, pick yourself off the ground.
I said, young man, 'cause you're in a new town
There's no need to be unhappy.
Its fun to stay at the JMCA!
 

·
Registered
Joined
·
10,140 Posts
Sarabi said:
Just came across this JMCA exhaust system. Will post better pics soon. Was wondering if I could get some assistance identifying the manufacturer.

Here is the jmca compliance plate on it.



What has me confused is what is a JMCA exhaust system doing on a aus del CBR250RR(RII)

Look forward to some info on this. Unfortunately I can't read Japanese.
Interesting but where is the japanese to be read?
 
1 - 20 of 24 Posts
Top