CBR250 Forums banner
1 - 20 of 43 Posts

·
Registered
Joined
·
725 Posts
Discussion Starter · #1 ·
EDITED: Tard date typo...

Hey everyone, the next Brisbane ride is gonna be pretty good i reckon.

Meet at the usual Gap servo, head up Nebo and Glorious and all the way over to Esk at the Brisbane valley freeway and then shoot down that all the way to Willowbank Raceway for the Saturday night "Test 'n' Tune" at which, gates open at 4PM...

[googlemaps]http://maps.google.com/maps?f=d&source=s_d&saddr=Waterworks+Rd&daddr=Mount+Nebo+Rd+to:Northbrook+Pkwy+to:-27.142868,152.481995+to:Champions+Way&geocode=FTkzXf4dx_odCQ%3BFa2mXf4dXQscCQ%3BFY5SX_4d5LUZCQ%3B%3BFcBwWf4dqZAZCQ&hl=en&mra=dpe&mrcr=0&mrsp=3&sz=11&via=1,2,3&sll=-27.325415,152.637177&sspn=0.47521,1.056747&ie=UTF8&ll=-27.426633,152.722321&spn=0.474775,1.056747&t=h&z=11[/googlemaps]

We will be leaving the servo at 10AM which should get us to Willowbank at roughly 4PM including lunch somewhere along the way. If you will be going down the strip its $40 and you admit one person not racing in for free so if we get enough people going down the strip, all the tag alongs can get in for free.

For those of us that will be firing ourselves down that 440M of sticky bitumen, the following rules apply for bikes slower than 9.99sec...

* full faced helmet to standard
* leather jacket or equivalent (kevlar)
* long pants
* full leather boots extending 275mm from the base of the heel
* full leather gloves

if you wanna run and dont have the gear then i am sure someone can provide your with loaner bits and bobs...

For those that do not want to come all the way to the test 'n' tune then we can, as always, part ways where ever you choose. though this time if anyone is running out of fuel, beep like a motherfucker so we notice :blush:
 

·
Registered
Joined
·
7,494 Posts
RE: [BRIS] 31JUN Tourist Drive and Drags

embedded google maps works but you have to take the .au out of the address.

it seems it only recognises maps.google.com addresses not maps.google.com.au

If you keep the URL exactly as is, but remove the AU, and then wrap it in the googlemaps tags, then it should work fine.

hope this helps.

also, inners on rideout
 

·
Registered
Joined
·
7,494 Posts
RE: [BRIS] 31JUL Tourist Drive and Drags

Mitch: I don't see why not? Might be best to check the willowbank test and tune website and they may have conditions on there.

BriZer: Usual servo is the BP at "The Gap" (a suburb), across the road from the golf course.

Everyone: Might get a case of beer and put the chill on it so that we can go to my place afterwards and have a brew and relax? I only live 15- 20min from willowbank drag strip.
 

·
Registered
Joined
·
534 Posts
RE: [BRIS] 31JUL Tourist Drive and Drags

sweeeet I won't be able to make this one, something has come up, but I'll take the bike up and give it a go one day soon! Let us know what times you guys run, I want to see some 10's :)
 

·
Registered
Joined
·
40 Posts
RE: [BRIS] 31JUL Tourist Drive and Drags

mitch179 said:
sweeeet I won't be able to make this one, something has come up, but I'll take the bike up and give it a go one day soon! Let us know what times you guys run, I want to see some 10's :)
shame im still in ibiza otherwise id bring the SS out for a run
 

·
Registered
Joined
·
366 Posts
RE: [BRIS] 31JUL Tourist Drive and Drags

Merudo said:
No you wouldn't it's bike drags :p
Moot said it's both?

PS.

Your item left the United States from ISC CHICAGO IL (USPS) at 3:57 PM on July 22, 2010. Information, if available, is updated periodically throughout the day. Please check again later.

Come on make it!
 

·
Registered
Joined
·
725 Posts
Discussion Starter · #19 ·
RE: [BRIS] 31JUL Tourist Drive and Drags

just a bit of clarification...

even if its raining make sure you pussies come out. if the conditions are too shite [and therefore probably raining out the drags] then we will fall back on failsafe plan 1 which is ride our asses to the nearest pool hall and crack some balls around...

or whatever the majority wanna do...
 
1 - 20 of 43 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top