CBR250 Forums banner

Would the stock pillion pegs fit a tyga kitted CBR250RR?

4109 Views 9 Replies 8 Participants Last post by  raskol
As per the thread subject.

Cheers.
1 - 10 of 10 Posts
yes, but you might need to push the fairings around a tiny bit to initially put them on.....

they also look quite ugly with the tyga tail.....
+1 on looking ugly.

measure the width of the connecting bolts and have a look at your closet wreckers and source some from another bike the look better.
i used to have them on my tyga...looked fine!
Thanks guys, will head to wreckers when i get some free time..
you owned a very sexy cbr250!! teach me ur neon tricks hehe
=]

pOint_01 said:
i used to have them on my tyga...looked fine!
+1 to butt ugly
maybe i should nock up a pretty pair
getnkd said:
you owned a very sexy cbr250!! teach me ur neon tricks hehe
=]

pOint_01 said:
i used to have them on my tyga...looked fine!

whatchu talkin about willis?
The Tyga kit is already ugly (esp the front) I dont think that a footrest or two can make it worse.

I love the OEM 250 fairing...esp the RR
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top